Advertisement
Flashlight Feature
The flashlight feature is initially only available for the
first 24 hours after the first power up, or until the
system is first armed. This feature is no longer
available after the first system arming.
Each time the flashlight features is used, and the system
is disarmed, the walk test timer restarts for 10 minutes.
1. Use a flashlight with a bright light beam, and stand
within 4' (1.2 m) of the sensor.
2. Swing the light beam past the sensor Lens 3-5 times,
holding the beam on the window for 0.5 second each
pass.
Detection Patterns
Battery Replacement
• Remove the front cover.
• Replace the battery.
Recommended replacement batteries:
Panasonic CR123A
Honeywell 466
Duracell DL123 or DL123A
• Replace the front cover.
BATTERY CAUTION: Risk of fire, explosion and burns.
Do not recharge, disassemble, heat above 212° F (100°
C) or incinerate. Dispose of used batteries promptly.
Keep away from children.
Specifications
Power - Battery: One 3V, Lithium; Panasonic CR123A, Duracell DL 123 or DL
123A, Honywell 466
Battery Life, years (typical): 4 years
Range: 40' x 56' / 12 m x 17 m
Wall Mounting Height: 7' – 9' (2.1 m – 2.7 m); Optimal 7'6" (2.3 m)
Tampers: Cover and Wall; (reported separately to the panel)
Operating Temperature: 32° to 122° F / 0° to 50° C
Relative Humidity: 5 to 95%; non-condensing
Temperature Compensation: Advanced Dual Slope
Dimensions: 4.13" H x 2.38" W x 1.61" D / 105 mm H x 60.4 mm W x 41 mm D
Weight:
x
oz /
xx
g (net weight)
Note: the flashlight feature only initiates
or restarts the Test Mode and does not
change any other sensor settings.
Zones
18
A
Lower
46
B
Intermediate
36
C
Long
Approval Listings
FCC / IC
SIA-PIR-01
ETL
UL 639
ULC S306-03
RoHS
The product must be tested at least
once each year.
Advertisement
