Bridge Configuration - GE MDS Mercury Series Reference Manual

56
Ethernet Filtering Configuration Menu
Figure 3-23. Ethernet Filtering Configuration Menu
•
Enable Filtering
[ enabled, disabled; disabled
• Address 1, 2, 3, 4
enabled, the Mercury only accepts traffic on its Ethernet port
from the configured addresses.
[ Valid MAC address string

3.4.3 Bridge Configuration

Figure 3-24. Bridge Configuration Menu
• Bridge Priority —View/set the priority of the bridge in the span-
ning tree. [ 0-65535; 32769
•
Bridge Hello Time
parameter affects how often the bridge sends a spanning tree
Bridge Protocol Data Unit (BPDU). [
Mercury Reference Manual
Invisible place holder
—Activates Ethernet filtering.
]
—Ethernet address fields. When filtering is
]
Invisible place holder
]
—View/set spanning tree hello time. This
1-10 seconds; 2 seconds
05-4446A01, Rev. D
]