Parts Description - Makita DUR189 Instruction Manual

10. The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consulting an
expert for hazardous material is required. Please also
observe possibly more detailed national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
11. Follow your local regulations relating to dis-
posal of battery.
12. Use the batteries only with the products
sive heat, explosion, or leak of electrolyte.
SAVE THESE INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
void the Makita warranty for the Makita tool and charger.

PARTS DESCRIPTION

1 Battery cartridge
5 Auto speed control
indicator
9 Hanger
13 Shoulder harness
Installing the batteries to
2
9
10
11
12
2 Lock-off lever
6 Power lamp
10 Lock sleeve
- -
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge if you do not use
-
1
3
5
4
7
13
3 Switch trigger
7 Main power button
11 Handle
- -
6 ENGLISH
6
8
4 Speed indicator
8 Reverse button
12 Protector (cutting tool
guard)
- -