08 Input ports
For diagnostic purposes, the digital and analogue input parameters are dynamically dis-
played for both ERESCO MF4 control and radiating unit.
Use keys F3 and F4 to toggle between the masks.
Use keys F1 und F2 to select individual lines.
Displayed are:
Row 1:
Row 2:
Row 3:
Row 4:
Row 5:
Copyright by GE Sensing & Inspection Technologies GmbH
46
Operating Manual ERESCO MF4 Type Series
port name
actual state
(Bit=0 /
Bit=1)
location (Control
/ X-ray unit
S=switch, X=plug)
no. of the message that appeares in the event of an error. The corresponding
message is displayed in the lower field, if the cursor is located on the corresponding
port.
status indication of the ports
) and hardware (device e.g. H=lamp,
(OK /
ERROR)
Bogenstrasse 41 D - 22926 Ahrensburg
08/24/2016
6. Edition, ID No.: 37020GB-F