DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured for Telnet Settings are described below:
Parameter
Telnet State
Port
Click the Apply button to accept the changes made.
The fields that can be configured for Web Setting are described below:
Parameter
Web State
Port
Click the Apply button to accept the changes made.
Session Timeout
This window is used to configure the session timeout.
To view the following window, click Management > Session Timeout, as shown below:
The fields that can be configured are described below:
Parameter
Web Session Timeout
Figure 4-21 Telnet/Web window
Description
Select this option to enable or disable the configuration through Telnet.
Enter the TCP port number used for Telnet management of the Switch.
The "well-known" TCP port for the Telnet protocol is 23.
Description
Select this option to enable or disable the configuration through the
web.
Enter the TCP port number used for Telnet management of the Switch.
The "well-known" TCP port for the Telnet protocol is 80.
Figure 4-22 Session Timeout window
Description
Enter the time in seconds of the web session timeout. Tick the Default
48