Poe Statistics - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Priority
Legacy Support
Mode
Max Wattage
Time Range
Click the Delete Time Range button to clear the setting in the corresponding Time Range field.
Click the Apply button to accept the changes made.

PoE Statistics

This window is used to display the PoE statistics.
To view the following window, click System > PoE > PoE Statistics, as shown below:
Figure 3-11 PoE Configuration window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select the priority for provisioning power to the port. Options to choose
from are Critical, High and Low.
Select this option to enable or disable the support of legacy PD.
Select the power management mode for the PoE ports. Options to
choose from are Auto and Never.
When selecting Auto in the Mode drop-down list, this option appears.
Tick the check box and enter the maximum wattage of power that can
be provisioned to the auto-detected PD. If the value is not entered, the
class of the PD automatically determines the maximum wattage which
can be provisioned. The valid range for maximum wattage is between
1000 mW and 30000 mW.
When selecting Auto in the Mode drop-down list, this option appears.
Tick the check box and enter the name of the time range to determine
the activation period.
19