Extended Ipv6 Acl - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide

Extended IPv6 ACL

After clicking the Add ACL button, users can create a new ACL profile, as shown below:
The fields that can be configured are described below:
Parameter
ACL Type
ID
ACL Name
Click the Apply button to create the new ACL profile.
After creating an Extend IPv6 ACL profile, the newly created Extend IPv6 ACL profile will be displayed in
the ACL profile display table, as shown below:
Click the Edit button to re-configure the specific ACL profile.
Click the Delete button to remove the specific ACL profile.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 8-63 Extended IPv6 ACL (Add Profile) window
Description
Select the ACL profile type here. Options to choose from are Standard
IP ACL, Extended IP ACL, Standard IPv6 ACL, Extended IPv6
ACL, Extended MAC ACL, and Extended Expert ACL.
Enter the ACL ID from 13000 to 14999.
Enter the ACL profile's name here. This name can be up to 32
characters long.
Figure 8-64 Extended IPv6 ACL (Main) window
229