Dimensions; Rma801 Remote Indicator Nameplate; Safety Certification Information; Figure 3: Dimensions Of Remote Indicator - Honeywell RMA801 User Manual

1.4

Dimensions

1.5

RMA801 Remote Indicator Nameplate

The Remote Indicator nameplate mounted on the bottom of the electronics housing (see Figure 1,
"approvals" nameplate) lists model number, physical configuration, electronics options, accessories,
certifications, and manufacturing specialties.
Identification of the series and basic Remote Indicator type is captured in the last digit in the key
number. The last digit represents itype.
•
A value of 1 in the last digit means the Remote Indicator type is RMA801 DE/Analog
For a complete selection breakdown of model number, refer to the appropriate specification and Model
Selection Guide provided as separate documents.
1.6

Safety Certification Information

An "approvals" nameplate is located on the bottom of the electronics housing; see Figure 1 for the exact
location. The approvals nameplate contains information and service marks that disclose the Remote
Indicator compliance information. Refer to Appendix A of this document for safety certification
requirements and details.
3

Figure 3: Dimensions of Remote Indicator

Figure 4 –Typical RMA801 Nameplate
RMA803 Remote Indicator User's Guide Revision 2