Paper Stack Feed Operation - Canon Staple Finisher-AA1 Service Manual

Paper Stack Feed Operation

1. The saddle gripper motor (M205) drives causing the saddle gripper via the gear and link to grip the trailing edge of the paper
stack in the saddle processing tray. Then the saddle paper end stopper motor (M206) drives to raise the saddle paper end
stopper and feeds the paper stack to the stitching position. (only in booklet mode)
Front Saddle Alignment Plate
Saddle Paper End Stopper
2. After stitching is complete, the saddle paper end stopper motor (M206) drives to lower the saddle paper end stopper and
feeds the paper stack to the paper folding position.
<Related error code>
• E5FA-8001: Saddle Gripper Motor error
• E5FA-8002: Saddle Gripper Motor error
Saddle Paper End Stopper Motor (M206)
Saddle Gripper
Saddle Paper End Stopper
Rear Saddle Alignment Plate
Saddle Alignment Motor (M203)
LINK
Saddle Gripper HP Sensor (PS209)
Gear
Saddle Gripper Motor (M205)
Saddle Paper End Stopper HP Sensor (PS210)
M206
64
2. Technical Explanation
Saddle Alignment
HP Sensor (PS207)