Honda Accord 2008 Body Repair Manual page 84

Main Menu
Rear Side Outer Panel
Installation (cont'd)
4-door/2-door
15. Weld the patch (A) at the cut section of the body side
outer panel (B).
B
Rear pillar section
(4)
A
Center pillar section (2-door)
(4)
Side sill section
(7)
3-44
Table of Contents
40 mm (1.6 in.)
B
40 mm (1.6 in.)
A
B
40 mm (1.6 in.)
A
4-door
16. Install the new wheel arch outer separator (A) on the
wheel arch extension (B).
NOTE: Apply the sealer (C) all the way around the
separator and inside the outer panel repair part (D)
without gaps.
A
C
B
2-door
17. Install the new front pillar outer separator on the front
pillar lower stiffener, and apply the sealer (see step 8
on page 3-21).
18. Install the new center pillar outer separator (A) on the
center pillar lower stiffener (B).
NOTE: Apply the sealer (C) all the way around the
separator and inside the outer panel repair part (D)
without gaps.
A
C
B
C
D
C
D