Installing Dust Bag - Makita DCL142 Instruction Manual

1
2
► 1. Front cover 2. Button
1. Push the button to open the front cover. Opening
it until a click is heard allows a positive stop at that
position.
► 1. Front cover 2. Front cover joint
NOTE:
• The cleaner is constructed in such a way that
the front cover comes off when trying to force
the front cover open at the angle of more than
90°. If the front cover comes off, insert it into the
front cover joint in place.
CAUTION:
• When closing the front cover, be careful not to
pinch your fingers.
1
► 1. Dust stopper
2. Pull out both the orange-colored dust stopper and
dust bag together at the same time.
1
2
6 ENGLISH
1
► 1. Dust stopper
3. Remove the dust stopper and empty the cleaner.
Dust bag and paper pack
Install either dust bag or paper pack before using
cleaner.
Use the dust stopper when installing either dust bag or
paper pack.
The dust bag can be used repeatedly by cleaning it out.
Paper pack is a throw-away type. Throw away the entire
paper pack without emptying when it has become full.

Installing dust bag

► 1. Upper side of dust stopper 2. Lower side of dust
stopper
Use the dust stopper when installing dust bag. Be
careful not to take the upper side for the lower side by
mistake because they are different each other.
1
2