Related Manuals for RIDGID PEX-One
Summary of Contents for RIDGID PEX-One
- Page 1 PEX-One Operator’s Manual Crimp Tool 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com...
-
Page 2: Safety Symbols
PEX-One Crimp Tool Safety Symbols In this operator’s manual and on the product, safety symbols and signal words are used to communicate important safety information. This section is provided to improve under- standing of these signal words and symbols . -
Page 3: Personal Safety
PEX-One Crimp Tool door use. Use of a cord suitable for out- Power Tool use and Care door use reduces the risk of electric shock. • Do not force power tool. Use the correct • If operating a power tool in a damp loca- power tool for your application. -
Page 4: Specific Safety Information
This will ensure that the age and injury. safety of the power tool is maintained. • Before operating the RIDGID PEX-One • Never service damaged battery packs. Crimp Tool, read and understand: Service of battery packs should only be performed by the manufacturer or author- –... - Page 5 Battery Warning Reverse Button Label Run Switch Dies Side Jaws Hand Strap Plate Figure 1 – PEX-One Crimp Tool Fixed Description Strap Anchors Caddy The RIDGID ® PEX-One Crimp Tool is an elec- Slot tro-mechanical tool, which when used with ap-...
-
Page 6: Specifications
Standard Equipment 3. Inspect crimp tool for: Refer to the RIDGID catalog for details on • Proper assembly, maintenance and equipment supplied with specific tool cata- com pleteness. -
Page 7: Hand Strap
• Any other condition which may prevent 2. Inspect work to be done and determine safe and normal operation. correct RIDGID tool and dies for the appli- cation per their specifications. Using incor- Do not use Crimp tool until any problems rect equipment for an application can have been repaired. -
Page 8: Preparing Connection
Always use a matched crimp, cause leaks or damage tool. Do set of RIDGID dies. If there are any issues re- not hang tool from fitting. garding proper die fit, do not use tool. Do not operate tool without dies installed. -
Page 9: Maintenance Instructions
Connection area that is out of reach of children and people 1. Visually inspect crimped connection for: unfamiliar with the RIDGID PEX-One Crimp Tool. The Crimp tool is dangerous in the hands • Tube not fully inserted. of untrained users. -
Page 10: Optional Equipment
PEX-One Crimp Tool Required Maintenance By RIDGID Independent Service Center The PEX-One Crimp Tool must be serviced at Disposal set intervals by a RIDGID Independent Service Center to ensure proper operation. This will Parts this tool contain valuable be indicated by the Tool Work/Status light (See materials and can be recycled. - Page 11 Visit us at www.TestEquipmentDepot.com ©2016, RIDGID, Inc. Printed 12/16 The Emerson logo and RIDGID logo are registered trademarks of Emerson Electric Co. or RIDGID, Inc. in the U.S. and other countries. 085-003-980.10 EC41808 All other trademarks belong to their respective holders.