Table of Contents
Advertisement
UK
Operation
Brewing Indicator
light
"full" indicator light
Power on indicator
light
Power switch
Preparation before first use
BUFFALO recommend that the appliance is cleaned out before using for the first time, or if the appliance
has been sat unused for an extended period of time.
Manual filling mode
1. Slide the empty filter basket into position between the two basket tabs.
2. Place the airpot on the base beneath the basket. Ensure the lid of the airpot is open and the
tubular/spout insert is in place.
3. Fill the reservoir with cold water.
4. Connect to the mains power supply.
5. Turn the power switch
power on indicator light illuminates.
6. When fully filled, the "full" indicator light will illuminate.
7. Press the brewing button. The brewing indicator light illuminates and the hot water will begin to fill
the airpot.
Note:
•
For manual filling, ensure to use a coffee jug or measuring jug to avoid overfilling.
The maximum amount of water the reservoir can contain is 2.2 litres.
•
During operation, steam may rise from the appliance and loud bubbling
noises may be heard. This is perfectly normal.
4
CW306_UK_A5_v1_20180621.indb 4
3. Connect to the mains power supply.
4. Turn the power switch
On. The
light illuminates.
5. Press the auto-fill button to start automatic filling.
Water reservoir cover
Brewing button
Auto-fill button
Filter basket
Airpot
Auto filling mode
On. The power on indicator
2018/6/21 17:08
Advertisement
Table of Contents
