Table of Contents
Advertisement
COVERS
Covers
2-SIDED
COPY
OUTPUT
SPECIAL
MODES
2-SIDED
COPY
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT
ERASE
CENTERING
TRANSPARENCY INSERTS
COLOR
COVERS
ADJUSTMENTS
AUTO
AUTO
8/ 11
1
2
EXPOSURE
PAPER SELECT
3-14
The COVERS mode is used to place covers on the front, back, or both
the front and back of multipage documents.
To use the COVERS mode, an optional RADF must be installed.
Front cover sheets can be copied on, but only on the front side even
in the 1-sided to 2-sided and 2-sided to 2-sided copy modes.
The back side of the original designated as the cover will not be
copied.
Back cover sheets cannot be copied on, either on the front side or on
the back side.
Cover sheets must be fed from the bypass tray and must be the same
size as the copy paper being used to copy the document.
When the COVERS mode is selected, the stream feeding mode of
the RADF will always be off.
Place the originals in the optional document feeder tray.
1
Press the 2-SIDED COPY key and select the desired
2
duplex mode if needed. Press the "OK" key to close the
duplex selection window.
To copy in the 1-sided to 2-sided or 2-sided to 2-sided copy
mode, an optional duplex module (AR-DU2N) must be installed.
AUTO
Press the SPECIAL MODES key.
3
READY TO
The SPECIAL MODES screen will appear.
Press the "COVERS" key on the touch panel.
4
The setting screen for COVERS will appear.
OK
DUAL PAGE
COPY
IMAGE EDIT
100%
COPY RATIO
LOAD COVER STOCK INTO BYPASS-TRAY.
CANCEL
COVERS
PRINT ON FRONT COVER?
FRONT
YES
BACK
NO
FRONT+BACK
OK
OK
Advertisement
Table of Contents
