Table of Contents
Advertisement
Staple cartridge replacement
When the staple cartridge becomes empty, the message "ADD
STAPLES." will appear. Replace the staple cartridge as follows:
20-BIN STAPLE SORTER (AR-SS2)
Open the stapler cover.
1
Lift the release lever and pull out the staple box.
2
Lift the release lever to unlock the staple box. Then pull out the
box.
Remove the empty staple cartridge from inside the
3
staple box.
Insert the new staple cartridge into the box until it clicks
4
in place.
Insert the new cartridge by aligning the arrows on the cartridge
with those on the box. Check that the cartridge locks in place by
pulling it slightly.
The cartridge holds 5,000 staples.
NOTE:
Be sure not to remove the rear paper and tape before inserting
the cartridge.
7-9
Advertisement
Table of Contents
