Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–3 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
A
G1033X
E
G1033/
G1033Z
Figure 1. Table height and feed controls.
A. Control
Panel
(G1033X): START button turns motor ON
when pressed. Emergency STOP button
turns motor OFF when pressed; for safety
purposes, this button will remain depressed
and prevent restarting until reset. Reset by
rotating clockwise until it pops out.
B. Table Height Handwheel: Raises and low-
ers table to accommodate different workpiece
thicknesses. One complete revolution moves
the table approximately
-4-
manual
BEFORE
B
C
D
F
for
Magnetic
Switch
⁄
".
1
16
C. Feed Rate Control Knob: Selects 28 FPM
feed rate when pushed in or 16 FPM feed
rate when pulled out.
D. Table Locks: Secure table height posi-
tion when tightened.
E. Magnetic ON/OFF Switch (G1033 &
G1033Z): Start button turns motor ON when
pressed. Stop button turns motor OFF when
pressed.
F.
Depth Limiter: Limits depth of cut to a maxi-
mum of
⁄
" at full width.
1
8
G
Figure 2. Return rollers and dust hood.
G. Return Rollers: Assist sliding workpiece
back to operator following planing operation.
H. Dust Hood: Connects to a dust-collection
system to extract shavings and dust during
operation.
Model G1033/X/Z (Mfd. Since 02/19)
H
Advertisement
Table of Contents
