Specifications; Part Names And Functions - Epson TP3 Manual

Functions & Installation 2. Specifications

2. Specifications

2.1 Part Names and Functions

Front view
Back view
(6)
(7)
(8)
(1) Mode Selector Key switch
NOTE

8
(1)
(9)
The mode selector key switch is used to change the operation mode between
*1
TEACH and AUTO. The mode can be fixed by pulling out the key.
(*1: For the test mode: T1 and T2)
When the mode is switched while a program is running, the program will be stopped.
To switch the mode from TEACH to AUTO, close the latch.
To change to the test mode, switch the mode selector key switch to TEACH, and tap
the [Test] tab on the touch panel.
For details of the operation modes, refer to Functions & Installation 4 Operation
Mode (TEACH, AUTO, TEST).
T2 mode cannot be used on RC700-A Controllers complying with the UL standards.
(2)
(3)
(8)
(10)
(4)
(5)
RC700-A option TP3 Rev.8