Advertisement
8. Install the centerstand as shown.
PIVOT PIPE
9. Install the washer as shown.
<Right side>
CENTERSTAND
10. Install the split pin as shown.
CENTERSTAND
CENTERSTAND
WASHER
SPLIT PIN
WASHER
SPLIT PIN
Widen.
11. Install the spring hook as shown.
12. Apply grease to the position shown.
CENTERSTAND
13. Install the spring as shown.
• The spring installation should be performed
by two people. While one person holds the
motorcycle, another person installs the
spring.
• First install to the upper side spring hook,
then install the spring on the centerstand.
CENTERSTAND
14. Install the motorcycle's parts in the reverse order of
removal.
3 of 3
SPRING HOOK
GREASE
Apply to the marked surfaces.
SPRING HOOK
SPRING
HOOK
SPRING
Advertisement
