Makita HR2230 Technical Information page 8

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Change Lever
DISASSEMBLY
Disassemble Change lever as illustrated in Figs. 18 and 19.
Fig.18
Change Lever
Lock Button
Pushing Lock button into Change lever,
turn Change lever fully to Drill mode
until it stops.
ASSEMBLY
1) Assemble Change lever to Gear housing complete in the order of Figs. 20 and 21.
2) Make sure that Change lever stops at every operation mode exactly after assembling.
Fig.20
Small pin
of Change
lever
Large pin of Change
lever
Lock plate comes into your sight
through the hole for Change lever
insertion before mounting Change lever.
When inserting Change lever into Gear
housing complete, contact the small pin
to this Lock plate as designated in gray
color. Change lever can be inserted in
Hammer drill mode.
Fig.19
Drill mode
Remove Change lever by levering up it with Slotted head screwdriver,
inserted between Gear housing complete and Change lever.
Lock plate
Drill mode
Pushing Lock button into Change
lever, turn Change lever fully
to Drill mode until it stops.
Fig.21
Hammer drill
mode
Pushing Lock button into Change
lever, tap Change lever.
Change lever can be assembled to
Gear housing complete.
P 8 / 20
Lock button