Makita DUR365U Instruction Manual page 3

Save all warnings and instruc-
tions for future reference.
Intended use
1. The cordless grass trimmer / brushcutter / string
trimmer is only intended for cutting grass, weeds,
bushes and undergrowth. It should not be used
for any other purpose such as edging or hedge
General instructions
1. Never allow people unfamiliar with these instruc-
tions, people (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge to use the tool.
Children should be supervised to ensure that they
do not play with the tool.
2. Before starting the tool, read this instruction manual
to become familiar with the handling of the tool.
experience or knowledge regarding handling of
brushcutters and string trimmers.
4. When lending the tool, always attach this instruc-
tion manual.
5. Handle the tool with the utmost care and attention.
6. Never use the tool after consuming alcohol or
drugs, or if feeling tired or ill.
7. Never attempt to modify the tool.
8. Follow the regulations about handling of brushcut-
ters and string trimmers in your country.
Personal protective equipment
1. Wear safety helmet, protective goggles and pro-
2. Wear ear protection such as ear muffs to prevent
hearing loss.
3. Wear proper clothing and shoes for safe operation,
such as a work overall and sturdy, non-slip shoes.
4. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
5. When touching the cutting blade, wear protective
gloves. Cutting blades can cut bare hands severely.
Work area safety
1. Operate the tool under good visibility and daylight condi-
tions only. Do not operate the tool in darkness or fog.
2. Do not operate the tool in explosive atmospheres,
gases or dust. The tool creates sparks which may
ignite the dust or fumes.
3. During operation, never stand on an unstable
or slippery surface or a steep slope. During the
cold season, beware of ice and snow and always
ensure secure footing.
4. During operation, keep bystanders or animals at
least 15 m away from the tool. Stop the tool as
soon as someone approaches.
5. Never operate the machine while people, espe-
cially children, or pets are nearby.
6. Before operation, examine the work area for
or cause dangerous kickback and result in serious
7. WARNING: Use of this product can create dust
containing chemicals which may cause respiratory
or other illnesses. Some examples of these chem-
icals are compounds found in pesticides, insec-
ticides, fertilizers and herbicides. Your risk from
these exposures varies, depending on how often
you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such
as those dust masks that are specially designed to
Electrical and battery safety
1. Do not expose the tool to rain or wet conditions. Water
entering the tool will increase the risk of electric shock.
2. Do not use the tool if the switch does not turn it on
and off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
3. Prevent unintentional starting. Ensure the switch
is in the off-position before installing a battery
pack, picking up or carrying the tool. Carrying the
the tool that have the switch on invites accidents.
3 ENGLISH