Fujitsu ETERNUS DX60 S3 User Manual page 270

Chapter 5 Connectivity Status
5.4 LUN Group
• Capacity
The volume capacity is displayed.
When the "Type" is "SDV", the logical capacity, which can be accessed from the host, is displayed.
• LUN Group
If the volume is allocated to different LUN groups, the LUN group name is displayed. If the host, ports, and
LUNs are allocated without specifying a host group or CA port group, the location information of the ports
is displayed.
When a volume is not allocated to different LUN groups, the field is blank.
• UID
The volume UID is displayed.
The UID is an identifier (storage system name) to specify a volume from the open system server.
A "-" (hyphen) is displayed for the Deduplication/Compression System Volume.
This item is displayed only when the controller firmware version V10L4x or later is used.
270
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0