Fujitsu ETERNUS DX60 S3 User Manual page 221

Chapter 4 Volume Status
4.10 Snapshot
• Manual
The Snapshot is set from VMware vSphere Web Client.
Refer to "ETERNUS vCenter Plug-in 3.0.0 User's Guide" for details.
- Schedule
Status of the scheduled operation for Snapshot is displayed.
If the Snapshot is not set or if the collection mode (or the "Mode" setting) for Snapshot is set to
"Manual", a "-" (hyphen) is displayed.
• Active
• Inactive
- Session Status
The session status for the Snapshot is displayed.
If the Snapshot is not set, a "-" (hyphen) is displayed.
• Normal
Snapshot performs normally.
• Error
Some Snapshots cannot be referenced due to an error.
If the session status of even one generation is error in the [Volume Detail] screen, "Error" is dis-
played for this item. Refer to
- Schedule Day
The Snapshot acquisition schedule (set day) is displayed.
If the Snapshot schedule is specified for all the days of the week, "Every Day" is displayed.
If the Snapshot is not set or if the collection mode (or the "Mode" setting) for Snapshot is set to "Man-
ual", a "-" (hyphen) is displayed.
- Schedule Time
The Snapshot acquisition schedule (set time) is displayed.
If the Snapshot schedule is specified for all hours, "Every Hour" is displayed.
If the Snapshot is not set or if the collection mode (or the "Mode" setting) for Snapshot is set to "Man-
ual", a "-" (hyphen) is displayed.
- Number of Generations
The number of generations for the Snapshot is displayed. If the Snapshot is not set, a "-" (hyphen) is
displayed.
• ETERNUS DX100 S3
1 - 16 (*1) or 1 - 64 (*2)
• ETERNUS DX200 S3
1 - 64 (*1) or 1 - 128 (*2)
• ETERNUS DX500 S3
1 - 128
• ETERNUS DX600 S3
1 - 128
*1: The maximum number of generations when "Memory Extension" described below is installed. "Memory
Extension" is used in a Unified Storage environment or for the Deduplication/Compression function.
•
•
*2: The maximum number of generations when "Memory Extension" described below is installed.
•
•
"4.16 Volume Detail (Snapshot)" (page 236)
ETERNUS DX100 S3
8GB/CM
ETERNUS DX200 S3
16GB/CM
ETERNUS DX100 S3
16GB/CM (the controller firmware version is V10L53 or later)
ETERNUS DX200 S3
32GB/CM (the controller firmware version is V10L33 or later)
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
221
for details.
P2X0-1260-19ENZ0