Cisco 8811 User Manual page 8

Connect to the Network
• Cisco IP Phone 8861 and 8865 users that use Wi-Fi: Wi-Fi client setup
Step 4 Select IPv4 Setup.
Step 5 Navigate to Alternate TFTP and choose On.
Step 6
Select TFTP server 1.
Step 7 Enter your TFTP server address in the TFTP server 1 field.
Step 8 Press Apply.
Step 9 Press Continue.
Step 10 Press Exit.
Connect to Expressway
You can connect into your corporate network when you are working away from your office using Mobile and
Remote Access Through Expressway. Because your phone does not have a TFTP address configured, the
phone displays a Welcome screen to begin the sign-in process.
This allows you to connect into your corporate network using Mobile and Remote Access Through Expressway.
Before You Begin
If you have been using your phone at the office or with a VPN, reset your service mode before you connect
to Expressway.
If you need to connect to Mobile and Remote Access Through Expressway on-premise, restart your phone
and press Select when prompted.
Procedure
Step 1
Enter your activation code or service domain on the Welcome screen.
Step 2 Enter your username and password.
Step 3 Press Submit.
Activate Your Phone Automatically with a QR Code
If your phone has a camera, you can scan a QR code to activate the phone. If you inadvertently press Enter
manually, press Back
Before You Begin
You need the QR code from your welcome message.
If the code from your welcome message has expired, generate an activation code for your device with the Self
Care portal or request an activation code from your administrator.
Cisco IP Phone 8800 Series User Guide
8
to return to the QR code screen.
Your Phone