Honeywell GasAlertQuattro Operator's Manual page 26

4.
5.
Shop for Gas products online at:
Using the tab, pull on the ejector bar.
To the left of the tab, pull up on the ejector bar.
CanarySense
www.
GasAlertQuattro
6. Remove the spent batteries. Reset the ejector bar to
its original flat position. Ensure the ejector bar
engages the release clasp.
7. Insert the new batteries. Position the positive end of
the battery at a 30° angle and insert into the battery
pack before pushing the negative end down. Ensure
the batteries are not inserted over the tab.
.com
Maintenance
23
1.888.610.7664