janitza UMG 96-PA Installation Instructions Manual

Janitza electronics GmbH Janitza electronics GmbH
Vor dem Polstück 6 Vor dem Polstück 6
35633 Lahnau, Germany 35633 Lahnau, Germany
Support tel. +49 6441 9642-22 Support tel. +49 6441 9642-22
fax +49 6441 9642-30 fax +49 6441 9642-30
email: info@janitza.de email: info@janitza.de
www.janitza.com www.janitza.com
Safety Safety
2 2 2 2
Safety instructions Safety instructions
Property damage due to Property damage due to
The installation instructions do not include m The installation instructions do not include m
noncompliance of the noncompliance of the
a complete list of all safety measures necessary a complete list of all safety measures necessary
connection conditions or connection conditions or
for operating the device. for operating the device.
CAUTION! CAUTION!
impermissible overvoltages impermissible overvoltages
Special operating conditions may require Special operating conditions may require
additional measures. The installation additional measures. The installation
Noncompliance of the connection Noncompliance of the connection
instructions contain notes that must be instructions contain notes that must be
conditions or exceeding the permissible voltage conditions or exceeding the permissible voltage
ct. observed for your personal safety and to observed for your personal safety and to
range can damage or destroy your device. range can damage or destroy your device.
prevent property damage. prevent property damage.
Before you connect the device to the supply Before you connect the device to the supply
voltage, please observe the following: voltage, please observe the following:
Used symbols: Used symbols:
• The voltage and frequency must comply • The voltage and frequency must comply
with the specifications on the rating plate. with the specifications on the rating plate.
c c This symbol as a supplement to This symbol as a supplement to
Observe the limit values as described in Observe the limit values as described in
the safety instructions indicates the safety instructions indicates
the user manual. the user manual.
an electrical hazard. an electrical hazard.
• In building installations, secure the supply • In building installations, secure the supply
This symbol as a supplement to This symbol as a supplement to
m m
voltage with a UL/IEC-listed circuit voltage with a UL/IEC-listed circuit
the safety instructions indicates the safety instructions indicates
breaker/fuse. breaker/fuse.
a potential hazard. a potential hazard.
• The circuit breaker • The circuit breaker
C C
This symbol with the word NOTE! This symbol with the word NOTE!
- must be easily accessible for the user - must be easily accessible for the user
describes: describes:
and located in the vicinity of the device. and located in the vicinity of the device.
• Procedures that do not pose • Procedures that do not pose
- must be labeled for the respective - must be labeled for the respective
any risk of injuries. any risk of injuries.
device. device.
• Important information, • Important information,
• Do not tap the supply voltage at the • Do not tap the supply voltage at the
procedures or operations. procedures or operations.
voltage transformers. voltage transformers.
• Provide a fuse for the neutral conductor • Provide a fuse for the neutral conductor
Safety instructions are highlighted by a warning Safety instructions are highlighted by a warning
if the neutral conductor connection is not if the neutral conductor connection is not
triangle and represented as follows depending grounded to the source. triangle and represented as follows depending grounded to the source.
on the level of risk: on the level of risk:
Power Analyzer Power Analyzer
UMG 96-PA UMG 96-PA
Installation instructions Installation instructions
Installation Installation
 
Device settings Device settings
 
User manual:
c c
m m
Indicates an imminent danger Indicates an imminent danger
Risk of injury due to electric Risk of injury due to electric
that will result in serious and/or that will result in serious and/or
voltage. voltage.
fatal injuries. fatal injuries.
WARNING! WARNING!
DANGER! DANGER!
It may result in serious bodily harm or death It may result in serious bodily harm or death
due to: due to:
m m
Indicates a potentially dangerous Indicates a potentially dangerous
• Touching live exposed or stripped cores. • Touching live exposed or stripped cores.
situation that can result in serious situation that can result in serious
• Device inputs that are dangerous to touch. • Device inputs that are dangerous to touch.
injuries or death. injuries or death.
WARNING! WARNING!
Before starting work, disconnect your Before starting work, disconnect your
system from the power supply. Verify that system from the power supply. Verify that
m m
Indicates a potentially dangerous Indicates a potentially dangerous
there is no current. there is no current.
situation that can result in minor situation that can result in minor
injuries or property damage. injuries or property damage.
CAUTION! CAUTION!
Safety measures Safety measures
When operating electrical devices, specific When operating electrical devices, specific
parts of these devices inevitably carry parts of these devices inevitably carry
dangerous voltage. As a result, serious bodily dangerous voltage. As a result, serious bodily
harm or property damage can occur if they are harm or property damage can occur if they are
not handled correctly: not handled correctly:
• Before connecting the device, ground • Before connecting the device, ground
it at the protective conductor terminal it at the protective conductor terminal
if available. if available.
• Dangerous voltages may be present in • Dangerous voltages may be present in
all circuit parts connected to the voltage all circuit parts connected to the voltage
supply. supply.
General information General information
1 1
Disclaimer Disclaimer
It is essential that the information products It is essential that the information products
for the devices are observed to ensure for the devices are observed to ensure
safe operation and achieve the specified safe operation and achieve the specified
performance characteristics and product performance characteristics and product
features. Janitza electronics GmbH assumes features. Janitza electronics GmbH assumes
no liability for personal injuries, property no liability for personal injuries, property
damage and financial losses resulting from the damage and financial losses resulting from the
failure to observe the information products. failure to observe the information products.
Make sure that your information products are Make sure that your information products are
legible and accessible. legible and accessible.
You can find more documentation on our You can find more documentation on our
web site www.janitza.com under Support > web site www.janitza.com under Support >
Downloads. Downloads.
User manual:
Copyright notice Copyright notice
© 2017 - Janitza electronics GmbH - Lahnau. © 2017 - Janitza electronics GmbH - Lahnau.
All rights reserved. Any duplication, processing, All rights reserved. Any duplication, processing,
distribution and any other kind of use, even in distribution and any other kind of use, even in
part, is prohibited. part, is prohibited.
Subject to technical changes. Subject to technical changes.
• Make sure that the installation instructions • Make sure that the installation instructions
match your device. match your device.
• First, make sure you have read and • First, make sure you have read and
understood the document accompanying understood the document accompanying
the product. the product.
Network systems Network systems
5 5
• There may still be dangerous voltages present • There may still be dangerous voltages present
in the device even after it is disconnected in the device even after it is disconnected
Suitable network systems and maximum nominal voltages (DIN EN 61010-1/A1): Suitable network systems and maximum nominal voltages (DIN EN 61010-1/A1):
from the supply voltage (capacitor storage). from the supply voltage (capacitor storage).
• Do not operate operating equipment with • Do not operate operating equipment with
open current transformer circuits. open current transformer circuits.
Three-phase four-wire systems Three-phase four-wire systems
with earthed neutral conductor with earthed neutral conductor
• Do not exceed the limit values specified in • Do not exceed the limit values specified in
the user manual and on the rating plate. This the user manual and on the rating plate. This
must also be observed during inspections and must also be observed during inspections and
commissioning. commissioning.
• Observe the safety instructions and warning • Observe the safety instructions and warning
notices in the documents that accompany the notices in the documents that accompany the
devices. devices.
Qualified personnel E Qualified personnel
To prevent personal injuries and property To prevent personal injuries and property
IEC U IEC U / U
L-N
damage, only qualified personnel with electrical damage, only qualified personnel with electrical
engineering training may work on the device. engineering training may work on the device.
UL U UL / U U
L-N
They must also have knowledge They must also have knowledge
• Of the national accident prevention • Of the national accident prevention
regulations regulations
• In safety technology standards • In safety technology standards
• In the installation, commissioning and • In the installation, commissioning and
operation of the device. operation of the device.
E
1 / 6
• Keep the documents accompanying the
product accessible through its service life
and hand them over to the subsequent
owner where applicable.
• Please refer to www.janitza.com for
information concerning device revisions
and the associated adjustments to the
documentation accompanying the product.
Disposal
Please observe the national regulations.
Dispose of individual parts, where necessary,
depending on the properties and existing
country-specific regulations, e.g. as:
• Electronic waste
• Plastic
• Metal
or commission a certified disposal company
with the scrapping.
Relevant laws,
applied standards and directives
Please refer to the Declaration of Conformity
on our web site (www.janitza.com) for the
laws, standards and directives applied by
Janitza electronics GmbH.
Intended use Intended use
The device is The device is
• intended for installation in switching cabinets • intended for installation in switching cabinets
and small installation distributors. The device
can be installed in any mounting position
L1 L1 L1 L1
(please observe section 3 "Assembly").
L2 L2 L2 L2
• not intended for installation in vehicles. • not intended for installation in vehicles.
Using the device in mobile equipment
N N N N
is considered an unusual environmental
condition and is only permissible by special
R R agreement.
• not intended for installation in areas exposed • not intended for installation in areas exposed
L3 L3 L3 L3
E E E E E E to harmful oils, acids, gases, vapors, dust E E
The device can be used The device can be used and radiation, etc.
417 V / U 417 V / 720 V / 720 V
LN LN LL LL
L-L: L-N L-L:
• in TN and TT networks • in TN and TT networks
• residential and industrial sectors. • residential and industrial sectors. The prerequisites for smooth and safe operation The prerequisites for smooth and safe operation
347 V / U 347 V / 600 V / 600 V
LN LN LL LL
L-L: L-N L-L:
of the device include proper transport, storage, of the device include proper transport, storage,
L1 L1 L L
setup and assembly, as well as proper operation setup and assembly, as well as proper operation
and maintenance. and maintenance.
L2 L2 N N
E E E E E E E E
• Keep the documents accompanying the
product accessible through its service life
and hand them over to the subsequent
owner where applicable.
• Please refer to www.janitza.com for
information concerning device revisions
and the associated adjustments to the
documentation accompanying the product.
Disposal
Please observe the national regulations.
Dispose of individual parts, where necessary,
depending on the properties and existing
country-specific regulations, e.g. as:
• Electronic waste
• Plastic
• Metal
or commission a certified disposal company
with the scrapping.
Relevant laws,
applied standards and directives
Please refer to the Declaration of Conformity
on our web site (www.janitza.com) for the
laws, standards and directives applied by
Janitza electronics GmbH.
and small installation distributors. The device
can be installed in any mounting position
L1 L1 L1 L1
(please observe section 3 "Assembly").
Using the device in mobile equipment
is considered an unusual environmental
condition and is only permissible by special
agreement.
L2 L2 L2 L2
L3 L3 L3 L3
to harmful oils, acids, gases, vapors, dust E E E E E E E
and radiation, etc.
L1 L1
N N
L2 L2
E E E
2 2
3
6