Motorola SC 4812ET RF Hardware Installation Manual page 151

Step
1 Loosen the three (3) nuts that hold the I/O cover in place at the bottom of the BTS (see Figure D-5).
and reinstall the panel.
NOTE
The access panel is a two–piece panel; install the right side first.
Figure D-5: Reinstall Access Panel
Apr 2001
SC
TM
V0D.03
SC 4812ET/SC 614 BTS DC Power Sharing
Table D-4: Reinstall the Access Panel (SC 614)
*
In order to keep radiated and conducted emissions within
specifications, it is necessary to install all 3 of the nuts and
torque them properly.
ACCESS
PANEL
4812ET RF and Power Cabinet Hardware Installation Manual
Action
IMPORTANT
DRAFT
– continued
D
151