Makita 3706 Instruction Manual page 8

3
2
1. Knob
2. Tighten
3. Loosen
1
1. Knob
1
2
1. Thumb screw
2. Vacuum cover
1
2
3
1. Circular guide
2. Projections
3. Vacuum cover
8
Operation
001634
Loosen the knob, and adjust its position in accordance with the size of the cir-
1
cle to be cut. (The hole dimensions to be cut are indicated on the side of the
circular guide as a general guideline.) After completion of the adjustment,
tighten the knob securely.
Insert the end of the knob into the center of the circle to be cut, and proceed to
001635
cut in a clockwise direction.
Vacuum cover
Cleaner operations can be performed by connecting the cutout tool to Makita
vacuum cleaner or dust collector.
Installing vacuum cover
001636
Loosen the thumb screw and remove the shoe. Attach the vacuum cover, and
fasten it securely using the thumb screw.
Installing vacuum cover with circular guide
001637
Release the thumb screw which serves to secure the vacuum cover. Align the
projections in the circular guide with the grooves in the vacuum cover, and
secure the vacuum cover and circular guide using the thumb screw.