Honeywell S05 Series Product Data page 3

Table 2. O.S. Number Selection (see Table 3 also).
M Electrical Motor
S Fail Safe Function (Spring Return)
41 120 Vac Two-Position Control; Reversible Mount
71 24 Vac Modulating Control; Reversible Mount
75 24 Vac Modulating and Floating Control; Reversible Mount
81 24 Vac Two-Position Control; Reversible Mount
05 44 lb-in. (5 N•m)
10 88 lb-in. (10 N•m)
20 175 lb-in. (20 N•m)
Standard U.S. Model
a
A
Standard European Model
b
B
Selectable control signal; Adjustable zero and span;
b
E
Includes service and auto-adapt modes
a
H
1 No Feedback
2 Voltage Feedback Signal
0 No End Switches
2 Two End Switches
XX System Controlled Numbers
M S 75 20 A 2 0 XX
a
Model manufactured for sale in the United States.
b
Model manufactured for sale in Europe.
60 second models
MS7510A2016
MS7510A2214
MS7520A2015
MS7520A2213
Table 3. Actuator Catalog Numbering (see Table 2 also).
S Spring Return Fail Safe Mode
N Non-Spring Return Fail Safe Mode
05 44 lb-in. (5 N•m); Spring Return Only
10 88 lb-in. (10 N•m); Spring Return Only
20 175 lb-in. (20 N•m)
34 300 lb-in. (34 N•m); Non-Spring Return Only
24 24 Vac Floating (Series 60) Control
24-2POS 24 Vac Two-Position Control
120-2POS 120 Vac Two-Position Control
230-2POS 230 Vac Two-Position Control
010 24 Vac Modulating and Floating Control
Fixed Zero/Span, No End Switches
-SW2 Internal End Switches
Enhanced Modulating; Adjustable Zero/Span
a
-SER
S 10 24-2POS -SW2
a
Enhanced models include two internal end switches.
Stroke: 95° ±3°, mechanically limited.
Approvals: See Table 4.
S05, S10, S20 SERIES SPRING RETURN DIRECT COUPLED ACTUATORS
Design Life (at Rated Voltage):**
Two-position models: 50,000 full stroke cycles;
50,000 full stroke spring returns.
Floating and Modulating models: 60,000 full stroke cycles;
1,500,000 repositions; 60,000 full stroke spring returns.
Controller Type:
S05, S10, S20: See Table 3.
S05, S10, S20: Modulating (Series 70) or Floating (Series 60);
controlled by selector switch.
MS71XX: Modulating Voltage Input.
Input Impedance: 95K ohms minimum.
Feedback Signal: 0 or 2-10 Vdc;
Driving current is 3 mA minimum.
Torque Ratings:
Typical Holding, Driving, Spring Return:
S05: 44 lb-in. (5 N•m).
S10: 88 lb-in. (10 N•m).
S20: 175 lb-in. (20 N•m).
Stall Maximum (fully open at 75°F):
S05: 100 lb-in. (11.3 N•m).
S10: 200 lb-in. (22.6 N•m).
S20: 350 lb-in. (39.6 N•m).
Noise Rating at 1m (Maximum):
Holding: 20 dBA (no audible noise).
Two-position models:
Driving: 50 dBA.
Spring Return: 65 dBA.
Floating and Modulating models:
Driving: 40 dBA.
Spring Return: 50 dBA.
UL/cUL
UL873 Plenum Rating,
File No. E4436; Guide No. XAPX.
CE
C-TICK
Environmental Protection Ratings:
NEMA2 (US Models) or IP54 (European Models) when
mounted on a horizontal shaft with access cover below the
shaft.
Accessories:
27518 Balljoint (5/16 in.).
103598 Balljoint (1/4 in.).
205860 Electronic Minimum Position Potentiometer.
27520A-E,G,H-L,Q Pushrod (5/16 in. diameter).
32000085-001 Water-tight Cable Gland/Strain-relief Fitting (10
pack).
32003036-001 Weather Enclosure.
32004254-002 Self-Centering Shaft Adapter (supplied with
actuator).
50001194-001 Foot Mount Kit.
50005859-001 NEMA4/4X Enclosure.
50006427-001 Anti-Rotation Bracket (supplied with actuator).
SW2-US Auxiliary Switch Package.
See also Form 62-2620.
** Floating/Modulating 60 sec models
20,000 full stroke cycles
100,000 repositions
3
Table 4. Approvals.
S05, S10,
S20 Series
X
X
X
X
MS7110,
MS7106
X
X
63-2607—08