Honeywell CD3200 User Manual page 47

User's Manual ver. 2.0
10.3.19 Firing command
Operations: Read / Write
Meaning:
It's a command bit used to switch from analog external command to command via RS485
0 = Command from analog input
1 = Command from RS485 input
10.3.20 On-Off
Operations: Read / Write
Meaning:
It's used to switch ON-OFF the power.
0 = Power disabled
1 = Power enabled
10.3.21 HB RESET
Operations: Read / Write
Meaning:
It's a command bit to reset HB alarm.
This parameter has to be at 0 to have the alarm working properly.
0 = Reset disabled
1 = Reset enabled
10.3.22 Current Limit control
Operations: Read / Write
Meaning:
It's a command bit used to switch from analog C.L. potentiometer to command via RS485.
0 = Command from Current Limit pot.
1 = Command from RS485 input
10.3.23 Configuration
Parameter
Password
Actual Power
Feed-Back Selection
Soft Start
HB Delay
HB sensibility %
Power Set
Integral
Prop.
CD3200 up to110A
N. Note
123 Write
124 Read /write
125L Read /write
125H Read /write
126L Read /write
126H Read /write
127 Read /write
128L Read /write
128H Read /write
45
Honeywell
Bit 1
Bit 2
Bit 3
Bit 4
www.honeywell.com/imc