Makita CG100D Instruction Manual page 10

1. Holder
holding the holder.
1 2
1. Holder cap Holder
4. Push the rod gently until the piston touches the
bottom of cartridge.
dure in reverse.
Preparing package for use
Cut off the tip of the package.
NOTICE:
age may cause malfunction.
1
NOTICE:
1. Remove the holder cap, nozzle, and rubber ring
from the holder.
1 2 3
1. Holder cap
Pull the rod handle backward slowly until it stops.
Insert the package into the holder.
-
1. Holder
4. Attach the rubber ring, nozzle, and holder cap by
1 2 3
-
1. Holder cap
-
5. Push the rod gently until the piston touches the package.
ber ring, and then push the rod handle forward until it stops.
10 ENGLISH
4
Nozzle Rubber ring 4. Holder
1
4
Nozzle Rubber ring 4. Holder
-