Cisco TelePresence System Profile Series Quick Reference Manual page 2

seLFvieW & CAmerA ControL
To check how you appear on the screen,
tap more ( ) followed by Selfview (

If you need to adjust the camera, tap
Camera Control ( ). Tapping Camera

Control will also produce selfview.
Adjust zoom and pan as required.
Tap Back to go back.
touCh tones (dtmF)
You may be urged to enter touch tones
(DTMF) during a call, typically to reach
extensions or to provide a pin code. Tap more

( ) followed by touch tones
Tap anywhere outside the pad to exit.
CLeAr history
To clear History,
scroll as outlined
beyond what
appears to be the
top of the list.
A Clear List
button will then
appear.
Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved
FAr end CAmerA ControL
In a call, if the far end system permits, you
may control that camera. Tap the person's
).

name along the bottom line.
In the dialog box appearing, tap Camera
Control.
Adjust pan and zoom of the far end camera.
Tap Back to go back.
Note that this works for MultiSite as well
as Point-to-Point calls.

( ).
You may deactivate the microphone for
privacy reasons, if needed (
Tap as outlined (
volume.
When set to Do Not Disturb, ringtones are
muted and incoming calls are shown as
missed calls when you deactivate it. You may,
however, place calls as much as you like. To
activate this feature, press the icon in the
upper left corner. Press again to deactivate.
You may also hide the Do Not Disturb poster
by tapping Hide.
sound mAtters
).

) to adjust the sound

do not disturb
shAring PresentAtions
In a call, you may share sources connected
to your video system. The sources are
initially named PC, DVD, Document
camera and Secondary camera, but
they may have been renamed by your
administrator.
To share a source, make sure the source
is connected and tap Presentation (
Scroll horizontally, as outlined, to locate the

source ( ).


Tap Present to start sharing contents and
tap Present followed by Stop Presenting
to stop sharing contents.
LAyout ControL
In MultiSite and in Point-to-Point calls
with presentation running, you may alter
the layout on the screen. Tap more (

followed by Layout ( ).
Select your preferred layout.
ringtones & sounds
To set ringtones and sound, tap More
 
( ) followed by Settings (
Ringtone & Sound Settings (



Set Keytones to On or Off, the Ringtone
volume and select the ringtone of your
choice. Tap exit to go back.
D14807.01 TC 4.1 Feb. 2011

).

)
). Then tap

).