Advertisement
Output Contact
Terminals
12-24volt
AC/DC Input
6 Push Button Description Table
Push Button
SET
ENTER
UP
DWN
UP and DWN keys can be used to select data entries. After scrolling to the correct entry, depress ENTER to accept.
7 Programming Instructions
A. Setting Clock/Calendar:
Upon initial power up
Enter the current date, day of the week and time (military) by depressing UP and DWN to make the selction, then depress
ENTER to accept. Next, select either DS (daylight savings mode) or ST (standard time mode) by sepressing SET until
"ENTER to SET BK: appears in display as shown below.
HPT724 Installation Document P/N 52765:A 1/25/06
FM
+DC--
+BAT--
~AC~
12VDC
First Main In Terminal
Standby Battery Lithium Battery Socket
(order model #CR2032)
Function/Description
Scrolling keys for programming. Escaping out of existing programming.
Accepts selections made to progamming.
Scrolls through selections.
Scrolls through selections.
RLY OFF
SU 01:01
ENTER to
SET TIME
Depress SET
01/01/01
SU 01:01
Depress ENTER
ENTER to
SET BK
SET ENTER UP
DWN
Push Button Layout
will appear in display.
will appear in display.
will appear in display.
LCD Display
Continued on next page...
3
Advertisement
