NETGEAR EX7300 Quick Start Manual page 7

3. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to
connect the extender to the 5 GHz band.
Note: If your router supports the 5 GHz band, your extender
attempts to connect to the router's 5 GHz band the first time you
press the WPS button. If your extender did not connect to the router's
5 GHz band the first time, repeat the WPS process.
4. Unplug the extender and move it to a new location that is about
halfway between your router and the area with a poor router WiFi
signal.
The location that you choose must be within the range of your
existing WiFi router network.
5. Plug the extender into an electrical outlet and wait for the
Power LED
6. Use the Router Link LED
extender-to-router connection is optimal.
7. If the Router Link LED doesn't light amber or green, plug the extender
into an outlet closer to the router and try again.
to light green.
to help you choose a spot where the
7