Makita CA5000 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Cutter
  5. CA5000
  6. Instruction manual
Makita CA5000 Instruction Manual

Makita CA5000 Instruction Manual

Aluminum groove cutter
Hide thumbs Also See for CA5000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
Aluminum Groove Cutter
CA5000
DOUBLE INSULATION
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita CA5000

Summary of Contents for Makita CA5000

  • Page 1 INSTRUCTION MANUAL Aluminum Groove Cutter CA5000 DOUBLE INSULATION Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: CA5000 Groove cutter blade diameter 118.0 mm Circular saw blade diameter 165.0 mm Max. cutting depth (with groove cutter blade) 11.0 mm Max. cutting depth (with circular saw blade) 36.0 mm No load speed 2,200 - 6,400 min...

  • Page 3: Ec Declaration Of Conformity

    EC Declaration of Conformity Personal Safety For European countries only The EC declaration of conformity is included as Annex A to this instruction manual. General power tool safety warnings ication. A moment of inattention while operating WARNING: Read all safety warnings, instruc- Use personal protective equipment.

  • Page 4: Circular Saw Safety Warnings

    Power tool use and care for your application. better and safer at the rate for which it was designed. it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
  • Page 5 Large panels tend to sag under their own weight. Supports must be Forcing the saw can cause uneven cuts, loss of placed under the panel on both sides, near the line accuracy, and possible kickback. of cut and near the edge of the panel. Guard function If the saw is accidentally dropped, the guard may be bent.

  • Page 6: Functional Description

    FUNCTIONAL DESCRIPTION dangerous and can lead to serious accidents. CAUTION: By turning the quick stop, you can choose the appro- priate depth of groove cutting for 3, 4, or 6 mm board thickness swiftly. The number, seen from the handle side, indicates the workpiece board thickness.
  • Page 7 For deeper cut, turn it clockwise. For shallower cut, turn it counterclockwise. Lock-off button 2. Switch trigger Speed adjusting dial CAUTION: using low speed rated blades but for obtaining a Use only blades which are rated for at least the maxi- CAUTION: Triangular mark on the base indicates the center of the groove cutter blade.
  • Page 8 Guide plate For aligning the guide rail (optional accessory) with the Hex wrench is stored on the tool. To remove hex cutting line, use the guide plate. To install hex wrench, place it on the grip and insert it as far as it goes.
  • Page 9 Skirt Shaft lock 2. Hex bolt Remove the groove cutter blade. Slide in the circular saw blade from the opening which the skirt had covered. Install the circular saw blade in the same way as the groove cutter blade. And close the blade case door after installing the blade.

  • Page 10: Operation

    CAUTION: Use eye protection to avoid injury. CAUTION: For groove cutting operation, For groove cutting operation, connect a Makita vacuum cleaner to your tool. CAUTION: Connect a hose of the vacuum cleaner to the dust port. If both hands are holding saw, they cannot be cut by the blade.

  • Page 11: Maintenance

    Set the tool on the guide rail. Align the guide rail along the cutting line with using the guide plate. Make sure that the blade does not make any contact with workpiece. and wait until the blade attains full speed. cut, and simply move the tool forward over the work- until the cutting is completed.

  • Page 12: Optional Accessories

    The use of any other accessories Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Brush holder cap To maintain product SAFETY and RELIABILITY, be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.

Table of Contents