Indicators; Driving P. - Honda CR-V Owner's Manual

Indicators

Indicator Name
Parking Brake
and Brake
System Indicator
(Red)
(Red)
Brake System
Indicator
(Amber)
(Amber)
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
84
On/Blinking
Comes on for a few seconds when you
●
turn the ignition switch to ON
then goes off if the parking brake has
been released.
Comes on when the parking brake is
●
applied and goes off when it is released.
Comes on when the brake fluid level is
●
low.
Comes on if there is a problem with the
●
brake system.
The beeper sounds and the indicator
●
comes on if you drive with the parking
brake not fully released.
Comes on for a few seconds when you
●
turn the ignition switch to ON
then goes off.
Comes on if there is a problem with a
●
system related to braking other than
the conventional brake system.
Comes on if there is a problem with the
●
City-Brake Active system * .
Explanation
Comes on while driving - Make sure
●
*1 , the parking brake is released. Check
( w
the brake fluid level.
2 What to do when the indicator
comes on while driving P. 634
Comes on along with the ABS
●
indicator - Have your vehicle checked
by a dealer.
2 If the Brake System Indicator
(Red) Comes On P. 634
Stays on constantly - Have your
●
( w *1 , vehicle checked by a dealer.
Comes on along with the CTBA
●
indicator - The City-Brake Active
system does not activate. Have your
vehicle checked by a dealer.
2 City-Brake Active system
Message
—
* P. 502