Sequential Shift Mode Operation; Second Gear Lock Mode - Honda CR-V Owner's Manual

■

Second gear lock mode

If you pull the ( + paddle shifter while stopped or driving at 10 km/h (6 mph) or less,
the gear position will be locked in 2nd gear. This makes it easier to pull away on
slippery surfaces such as snow covered roads.
To cancel the 2nd gear lock mode, pull the
from S to D .
( (
■

Sequential Shift Mode Operation

Paddle Shifter
( -
(Shift down)
Downshifting when pulling
the paddle shifter
( -
(Changes to a lower gear)
- paddle shifter, or move the shift lever
(
Paddle Shifter
( +
(Shift up)
Upshifting when pulling
the ( + paddle shifter
(Changes to a higher gear)
1Sequential Shift Mode Operation
Each paddle shift operation makes a single gear
change.
To change gears continuously, release the paddle
shifter before pulling it again for the next gear.
If the gear position indicator blinks when you try to
shift up or down, this means your vehicle speed is not
in its allowable gear shifting range.
Slightly accelerate to shift up and decelerate to shift
down while the indicator is blinking.
Continued
uuWhen DrivinguShifting
409