Honda CR-V Owner's Manual page 412

Hide thumbs Also See for CR-V:

Table of Contents

9-speed automatic transmission models

Change the gear position in accordance with your driving needs.

Start the engine before you change the gear position.

Shift lever positions

Used when parking or starting the

Used when reversing

Used when idling

For normal driving (gears change

between 1st and 9th automatically)

When temporarily driving in the

sequential mode

Automatically changing gears

between 1st and 8th (8th gear is used

only at high speed)

Driving in the sequential mode

The vehicle can roll away if left unattended

without confirming that Park is engaged.

Always keep your foot on the brake pedal

until you have confirmed that

on the gear position Indicator.

You cannot turn the ignition switch to LOCK

and remove the key unless the transmission is in

The vehicle may move forward very slightly even in

while the engine is cold.

Depress the brake pedal firmly and, when necessary,

apply the parking brake.

When shifting positions in extremely low

temperatures (-30°C), there may be a short delay

before the shift position is displayed. Always confirm

you are in the correct shift position before driving.

The beeper sounds when you depress the accelerator

pedal with the gear position in

Change the gear position to

pedal depressed.

*1: Models with the keyless access system have an ENGINE

START/STOP button instead of an ignition switch.

uuWhen DrivinguShifting

with the brake