Epson PP-100II Technical Reference Manual page 100

Message
The monitoring folder is set to a folder which cannot be written to using
a limited account.
Log on to Windows using an administrator account and change it to a
folder which can be written to using a limited account.
The disc cannot be published because the remaining space at the
output device is insufficient.
Please remove unnecessary job data to increase the remaining space.
The path specified for the error rate log output folder of EPSON Total
Disc Setup does not exist or you do not have access to it.
Start EPSON Total Disc Setup and specify the error rate log output folder
again, or set up the access privileges.
Clicking Cancel cancels publishing, and exits TD Bridge.
The remaining space of the error rate log output folder is not sufficient.
After changing the folder or obtaining the available space, click OK.
Clicking Cancel cancels publishing, and exits TD Bridge.
The error rate threshold of EPSON Total Disc Setup has not been set. Set
the threshold and click OK.
Clicking Cancel cancels publishing, and exits TD Bridge.
There is an unfinished job. Do you want to exit?
TD Bridge is already running.
The application could not start because the necessary resource file
could not be found. Please reinstall the application.
TD Bridge cannot be started because the file (Control.ini) necessary for
operation cannot be found. Reinstall EPSON TD Bridge.
The process cannot proceed because EPSON Total Disc Maker cannot
be found.
Install EPSON Total Disc Maker.
EPSON Total Disc Control Service is not running.
You cannot publish from TD Bridge because EPSON Total Disc Maker is
already running.
Exit EPSON Total Disc Maker and click OK.
Clicking Cancel cancels publishing, and exits TD Bridge.
Cannot get the version of EPSON Total Disc Maker.
Reinstall EPSON Total Disc Maker.
This version of EPSON Total Disc Maker is not supported.
Install a supported version of EPSON Total Disc Maker.
The changed settings will be enabled when you next start the program.
Select a folder on the local computer as the monitoring folder.
Restart TD Bridge to enable the settings.
TD Bridge will exit.
Could not write the TD Bridge Environment Settings file.
The TD Bridge environment setting file does not exist or you do not
have access to it.
TD Bridge will exit.
Reboot the computer to enable the settings.
Reboot the computer to enable the settings.
TD Bridge will exit.
100
Icon Button
! OK The monitoring folder's improper setting is detected
when starting up TD Bridge while logging on to
Windows with a limited account.
! OK Space in the HDD in the output device is not sufficient
Cancel when a job is issued.
! OK The path specified for the error rate log output folder of
Cancel EPSON Total Disc Setup does not exist or you do not
have access to it.
! OK The remaining space of the error rate log output folder is
Cancel not sufficient.
! OK The error rate threshold of EPSON Total Disc Setup has
Cancel not been set.
! YES There is an unfinished job in the monitoring folder when
NO exiting TD Bridge.
! OK TD Bridge was already running when it was started up.
! OK The resource file could not be found when starting up TD
Bridge.
! OK The file (Control.ini) necessary for operation cannot be
found.
! OK The executable file for EPSON Total Disc Maker cannot be
found when a job is issued.
! OK Detected that the service of EPSON Total Disc Maker is
not running.
! OK EPSON Total Disc Maker is running when a job is issued.
Cancel
! OK Cannot get the version information of EPSON Total Disc
Maker.
! OK Detected that the version of EPSON Total Disc Maker is
not supported.
! OK Changed the settings in the environment settings
screen, and clicked [OK]
! OK Selected a folder outside the local computer in the folder
selecting dialog in the environment settings screen, and
clicked [OK].
! OK The environment settings was changed.
Cancel
! OK After clicking [OK] in the environment settings screen, ini
file cannot be written since you do not have access to it,
though the file exists.
! OK The ini file does not exist or you do not have access to it
when trying to open it right after TD Bridge starts up, or
after opening the environment setting screen.
! OK The environment settings was changed.
! OK The environment settings was changed.
Cancel
Cause