Table of Contents
Advertisement
MAN0889_Issue 3_03/13
Appendix A - Handheld Interrogator
Press Enter and the display will show the following message:
This message is displayed for three seconds at the end of a successful initialisation process.
Note:
The Searchline Excel system is live after a successful initialisation.
Set Time
This option lets you set the system's time and date.
The initial display after SET Time is chosen is in the following format:
where:
hh
mm
When first displayed only the current hour is shown.
All settings are adjusted by means of the ▲ and ▼ keys on the keypad. After setting the hour the minutes are
displayed.
After the time has been entered then the same process is used to set the date which is displayed in the
following format:
Ensure Zero Gas
then press Enter
Zero Cal OK
Installation
complete
Time HH:MM
hh:mm
Hours.
Minutes.
Date DD/MM/YY
dd/mm/yy
61
Searchline Excel Cross-Duct Technical Handbook
v
v
Advertisement
Table of Contents
