Yamaha MMP1 Setup Manual page 76

Hide thumbs Also See for MMP1:

Table of Contents

Configure Talkback Destination

Next, we will configure the Talkback Destinations. Talkback Destination is a kind of router for

talkback, and you can choose whether or not you route each talkback microphone to each

Cue, Studio Speaker and Aux bus. You can program up to 8 destination settings and assign

them to User Assignable buttons. This time we will make the following 8 destinations:

Talkback Destinations

1. Talkback 1 (Mic 1) to Cue 1

2. Talkback 1 (Mic 1) to Cue 2

3. Talkback 1 (Mic 1) to Cue 3

4. Talkback 1 (Mic 1) to Cue 1/2/3 and Studio Speakers

5. Talkback 2 (Mic 2) to Cue 1

6. Talkback 2 (Mic 2) to Cue 2

7. Talkback 2 (Mic 2) to Cue 3

8. Talkback 2 (Mic 2) to Cue 1/2/3 and Studio Speakers

[Settings – Talkback Destination]

Once you have set up Talkback Destination, go back to User Assignable and create buttons

for those destinations.

Table of Contents