Table of Contents
Advertisement
TEMPERATURE RANGE:
POWER REQUIREMENTS:
KY 196B:
FREQUENCY RANGE:
FREQUENCY STABILITY:
DESIGN:
FCC EMISSION DESIGNATORS:
POWER OUTPUT:
KY 196B:
MODULATION:
SIDETONE OUTPUT:
MICROPHONE:
HARMONIC CONTENT:
HIGH TEMPERATURE PROTECTION: If the transmitter or modulator circuits become hot
DUTY CYCLE:
Page 1-2
BENDIX/KING
KY 196B
VHF COMMUNICATIONS TRANSCEIVER
FCC ID:
TRANSMITTER
16 Watts minimum
70% modulation capability with 98% limiting.
Less than 15% distortion at 70% modulation.
Adjustable up to 100mW into 500Ω headphones
Standard carbon dynamic mic containing
transistorized preamp. Must provide 100mVRMS
into 100Ω load.
Greater than 60dB down from carrier.
enough to potentially hurt any components in the
transceiver, a protection circuit will automatically turn
down the transmitter power consumption and output
power to 4 Watts minimum.
1 minute on, 4 minutes off
--20°C to +55°C with short time
operation at +70°C
28VDC at 0.4A (Receive)
6.5A (Transmit)
118.000 MHz to 136.9916 MHz in
8.33 KHz mode.
118.000 MHz to 136.975 MHz in 25
KHz mode
0.0005% from --20°C to +55°C
All solid state, Printed circuit board
and point to point wiring.
ASYKY196B
6K00A3E
6K00A9W
10570I01.ZIPCDL
Rev 1 January/2000
Hide quick links:
Advertisement
Table of Contents
