Cisco UCS S3260 Manual page 4

Storage Server Features and Components Overview
2
3
4
5
6
Cisco UCS S3260 System Storage Management
4
Server bay 2 9
• (Optional)
server node
(Cisco UCS
S3260 M4
shown)
(Optional)
drive
expansion
module
System I/O 10
controller (SIOC)
• SIOC 1 is
required if you
have a server
node in server
bay 1
• SIOC 2 is
required if you
have server
node in server
bay 2
Power supplies 11
(four, redundant as
2+2)
40-Gb SFP+ ports 12
(two on each SIOC)
Chassis 13
Management
Controller (CMS)
Debug Firmware
Utility port (one
each SIOC)
Cisco UCS S3260 System Storage Management
Not used at this time
Solid state drive bays (up to
four 2.5-inch SAS SSDs)
• SSDs in bays 1 and 2
require a server node in
server bay 1
• SSDs in bays 3 and 4
require a server node in
server bay 2
Cisco UCS S3260 M4 server
node label (M4 SVRN)
This label identifies
Note
a Cisco UCS S3260
M4 server node. The
Cisco UCS S3260
M3 server node does
not have a label.
KVM console connector (one
each server node).
Used with a KVM cable that
provides two USB, one VGA,
and one serial connector
Server node unit identification
button/LED