3-2 Replacement of the Assy Top Plate
The Ceramic Glass may break if you use force especially on the edge.
Parts
Assy Top Plate
(Ceramic Glass)
3-3 Replacement of the Assy Control Panel
Parts
Assy Control Panel
This document can not be used without Samsung's authorization.
Attention
Explanation Photo
Explanation Photo
- 9 -
Explanation
1. Disconnect power.
2. Remove 4 - side direction 16 Screws
securing the Assy Top Plate to the Assy
Case Burner.
3. Raise the Assy Top Plate.
4. After replacement of the Assy Top Plate,
Screw the Assy Top Plate to the Assy Case
Burner.
Explanation
1. Lift up the Control Panel Assy.
2. Disconnect all connectors.
3. Control PBA is fixed by double-faced tape.
Separate Control PBA from Support PCB.