Cisco ASR 903 Installation Manual page 80

Unpacking and Verifying the Shipped Contents
Component
Accessories kit
ESD, wrist strap (disposable)
Documentation
Optional equipment
Note Most Cisco documentation is available online. Documentation that is shipped with your Cisco ASR 903 Router
includes the Regulatory Compliance and Safety Information for the Cisco ASR 903 Router document, and
the Cisco ASR 903 Router Documentation Roadmap that contains information about the various documents
that are available online and the links to them.
Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide
70
Description
Chassis rack-mount brackets (19-inch EIA)
Three sets of screws:
• Front and rear rack-mount bracket screws (2 sets)
• Cable-management bracket screws
Six cable-management brackets (one per bracket)
One earth lug with two 10-32 screws.
1 RJ45 to RJ45 crossover cable
1 RJ45 to DB-9 (female) adapter
One disposable wrist strap (optional)
Regulatory Compliance and Safety Information for the Cisco ASR 903 Router
Check the container for the following optional equipment:
• Power cord if an AC power supply was shipped. There are no cords for the DC power supply
units.
• T1/E1 cable connector (required only for T1/E1 interface modules)
Preparing for Installation