Control Mode - GE PACE5000 User Manual

PACE Pressure Controller User Manual
Control set-up
Vent
Nudge resolution
Set-point limits
Slew rate

Control mode

Global set-up
Status
Vent set-up
Exit set-up.
Replaced by Go to Ground when in
aeronautical option.
[EN] English
- Yes/No
Sets set-point
-
nudge resoultion.
st th
- 1 to 7 digit.
Upper
Lower
Enable/disable
Linear - Enter units/second
Maximum rate
Toggle between: fast/no overshoot
Active - Continuous control to set-point
Passive - Controls outside user defined band
Gauge - Controls from zero gauge to set-point
- see 3.6:
- see 3.9:
3 - 9 K0443 Revision A