Removing And Replacing The Flip Cover - Motorola V235 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Flip Cover

6809495A43-C
1. Remove battery cover, battery, SIM, antenna, rear housing, transceiver board
assembly, and flip assembly as described in the procedures.
2. Insert the flat edge of disassembly tool into the top of the flip cover and pry
down flip cover to the bottom to release the flip cover (see Figure 14).
Figure 14. Removing the Flip Cover
3. Slide the flip cover down to the bottom and lift the cover away from the flip
assembly.
4. To replace, align the flip cover to the flip assembly.
5. Carefully press the flip cover onto the flip assembly until all latches are fully
engaged.
6. Replace the flip assembly, transceiver board assembly, rear housing, antenna,
SIM, battery, and battery cover as described in the procedures.
Flip Cover
April 03, 2006
Disassembly
Disassembly tool
060394o
33