Motorola V235 Service Manual page 28

Disassembly
28
4. Lift the transceiver board assembly out of the front housing. See Figure 9.
Figure 9. Removing the transceiver PC board assembly
5. To replace, insert the transceiver board assembly into the front housing with
the flex connector on top.
➧
Be sure the volume/smart buttons and voice button are correctly positioned in
relation to the corresponding switches on the transceiver board. Verify operation of
the buttons after replacing the transceiver board.
6. Insert the flex connector squarely into its mating connector on the transceiver
board and press firmly until it snaps into place.
7. Replace the rear housing, antenna, SIM, battery, and battery cover as
described in the procedures.
Transceiver Board
April 03, 2006
V235 GSM
050482o
6809495A43-C