Disassembly
Removing and Replacing the Transceiver Board Assembly
G
G
26
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, SIM, antenna, and rear housing as
described in the procedures.
2.
Use the plastic tweezers to lift the transceiver board gasket away from the
transceiver board (see Figure 7) .
Figure 7. Removing the Gasket From the Transceiver Board
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
Gasket
April 03, 2006
V235 GSM
050480o
6809495A43-C