Translating Internal Client Ip Addresses Between The Inside And Dmz Interfaces - Cisco ASA 5505 Getting Started Manual

Configuring the Security Appliance for a DMZ Deployment

Translating Internal Client IP Addresses Between the Inside and DMZ Interfaces

Step 1
Step 2
Step 3
Step 4
ASA 5505 Getting Started Guide
6-16
To configure NAT to translate internal client IP addresses between the inside
interface and the DMZ interface, perform the following steps:
In the main ASDM window, click the Configuration tool.
In the Device List area on the left side of the ASDM window, click Firewall.
In the Firewall pane on the left side of the ASDM window, click NAT Rules.
Click the green plus (+) icon and choose Add Static NAT Rule.
The Add Static NAT Rule dialog box appears.
Chapter 6 Scenario: DMZ Configuration
78-18003-02