Control Panel - Grizzly G0825 Owner's Manual

Control Panel

N
W
V
U
N. °C & °F Readout Indicator Lights: Indicate if
temperature is shown in Fahrenheit or Celsius.
Setting is adjusted using Temperature
Control Buttons (T).
O. Current Temperature Display: Shows actu-
al glue pot temperature.
P. Preset Work Temperature Display: Shows
desired working temperature for glue pot.
Q. Heating Unit ON/OFF Button: Activates
glue pot heating element when turned ON.
R. Feet Per Minute (FPM)/Meters Per Minute
(MPM) Indicator: Indicates edgebanding
tape feed speed from 6.5–20 FPM or 2.0–6.0
meters per minute. FPM is adjusted using
Feed Rate Control Dial (see Page 4).
Model G0825 (Mfd. Since 02/17)
O
T
Figure 3. Control panel functions.
S. Feed Roller Preheat Light: Illuminates when
T.
U. Standard/Metric Toggle Button: Press but-
V. Storage Indicator Light: Illuminates when
W. Heater Indicator Light: Illuminates when
Q
P
glue pot reaches minimum working tempera-
ture of 250°F (120°C). This signals when feed
rollers may be turned ON.
Temperature Control Buttons: Increase
or decrease glue pot temperature in 1°
increments. Holding either button will rapidly
increase or decrease temperature setting.
ton to toggle between metric and standard
unit display.
glue pot temperature is at or below 140°F
(60°C), signaling machine is cool enough to
be stored.
glue pot heating unit is turned ON.
R
S
-5-